The only spacer I have ever seen, on ALL Spridgets, including the 60
Bugeye that has a slight start to RHD status, was the metal spacer
about 1/4" thick. This cants the rack enough to accommodate the fact
that the column does not go straight into it from the instrument
panel.
On 1/14/07, Phil Nase <nase@ptd.net> wrote:
> I thought when I took the steering rack off the BE there were paper gaskets
> between the steering rack brackets and the chassis. I don't see a reference
> to them in any book.
>
> Do they just bolt up to the frame w/o any material in there?
>
> Phil Nase
> Quakertown, PA
> http://home.comcast.net/~philnasecpa
|