1275 Rod

John:
I think I can help you with a rod. I was given a 1275 that had a piston let
go, ruining it and the big end of one rod. The block, the crank, and all the
other parts look OK. I'd be glad to send you the best of the other three
rods. I'll check for the part number stamped on  it and make sure it is
straight as best I can. Of course, I recommend that you verify its quality
before you put it in an engine.  
Let me know if you still need it and where to send it.

Bob Spruck
Sharpsburg, GA