Thanks Gerard, I know about the offsets but it looks like they are all the
same just reversed on two pistons. I haven't had any offers for any rods yet
though.
Jon
> >
> You should note that the rods have offsets. If you have the rod numbers
all
> on the same side, as you should (I'm not sure if you can flip them), you
> need to make sure they are in the right position. If you are not getting a
> number four rod, 2 and 4 and 1 and 3 are offset the same way.
>
> Gerard
>
> At 11:51 AM -0700 7/12/01, Jon Paschke wrote:
> >Hi All,
> >
> >I'm needing a rod for my 1275 Spridget motor. I have 3 of the AEG-625
Midget
> >rods but can't find a 4th. This number is cast into the rods so I want to
> >match it with another, also if I get a choice it is number 4 but I can
> >restamp. Thanks in advance, I expect to pay but hopefully not through the
> >nose. ;-)
|