shotimes
[Top] [All Lists]

RE: [Shotimes] Crush Washers

To: <Shotimes@autox.team.net>
Subject: RE: [Shotimes] Crush Washers
From: "Bob" <bob@hotpursuit.net>
Date: Wed, 12 Jul 2006 20:59:31 -0700
You can generally get away with reusing them if they go back on exactly where 
they came off and in the same orientation - BUT I
DON'T RECOMMEND THAT.  Napa was a good choice.  I have found that Autozone had 
a whole box of them.  I bought several sets from them
for less than $5.  I would look for another shop that would have them in stock 
and take your old ones down there.  I believe that
the size is M10X1.5

        -- Bob

> -----Original Message-----
> From: shotimes-admin@autox.team.net 
> [mailto:shotimes-admin@autox.team.net] On Behalf Of TBailSHO@aol.com
> Sent: Wednesday, July 12, 2006 8:09 PM
> To: shotimes@autox.team.net
> Subject: [Shotimes] Crush Washers
> 
> Thanks to all of you who responded to my brake question of a 
> couple weeks 
> ago.  With regard to my issues I have a box with four new 
> brake hoses waiting to 
> be installed and I have a Motive Pressure Bleeder in the mail 
> (something I've 
> wanted for a while anyway).  I didn't fabricate the questions 
> for the group, 
> but almost would consider it due to the feedback I got on a 
> somewhat technical 
> problem.  Its refreshing to know we are interested in more 
> than how shiny a 
> wheel or how many watt sound system we can cram into our rides.  
>      I do have another brake related item to ask about.  
> Something tells me 
> when I put the new hoses on, I should also replace the crush 
> washers at the 
> banjo fittings.  Must be an old memory, but I think those 
> things can be flattened 
> out to where they are difficult to remove or perhaps break, 
> particularly 
> since they've not been touched in 15 years.  I stopped at the 
> local NAPA store and 
> they opened a catalog to a page with about 15 washers 
> pictured along with 
> dimensions for each and asked which ones I'd like.  I told 
> them the proper one 
> for my car and they said they aren't listed that way.  You 
> just have to know the 
> right size.  Sounded pretty screwed up to me, so----anybody 
> been through 
> this?  I could go to the dealer, but would rather not, and do 
> you think I should 
> have some on hand before I start taking the lines off?
>      Thanks again for sharing of the knowledge.  Just think, 
> if we'd all 
> bought Honda Accords we wouldn't know nearly as much!  We 
> have one and nothing 
> ever happens.
> 
> Tom Bailey
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes

<Prev in Thread] Current Thread [Next in Thread>