A few months ago my fastener supplier moved and so un-earthed a bunch of BSF
surplus bolts/screws. I bought the lot. Many 5/16" and 3/8" BSF Allen head
screws and also straight set screws. Some 1/4" BSF x 1/2" and x 3/4" Allen
head screws but unfortunately no 1/4" BSF x 1".
I can probably buy 1/4" BSF x 1" Allen head screws, the supplier is
checking availablity.
.
Also have 1/4" x 3/8* , 1/4" BSF x 1/2" and 1/4" BSF x 5/8" flat head slot
screws, great for radiator shell mounting .
If any of this is of use, I think I have a lifetime supply.
Regards, Bob Grunau,
Dave,
TAterry forwarded 3 of these to me that are now in my F clutch fingers.
Nice. Mike Dowley says they are NLA in the UK. tommm
> Use Allen screws (socket head). They are high tensile and adjustable from
> the side with an Allen key.
>
> I got some a while ago for TA Terry - if you want I'll see if the fastener
> place still has them. Size is 1/4 BSF X 1" long.
>
> I don't believe the screws need to be hardened: we've been using Allen
> screws as above in our clutch for 30 years.
>
> Regards
>
> Dave Dwyer
> J2, TA, TC
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.408 / Virus Database: 230 - Release Date: 10/24/02
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
|