vintage-race (thread)

Trip to England, George A. Mershon Jr., 2000/11/30
Re: Transplants, Charles Christ, 2000/11/30
- Transplants, Jim Hayes, 2000/11/30
Pressure for "prodification", Jim Hayes, 2000/11/29
Re: Successful passing, safety, et al., Mark J Bradakis, 2000/11/29
Protect our baloney, John.Desantis, 2000/11/29
Re: Successful passing., S800Racer, 2000/11/29
- Re: Successful passing., John.Desantis, 2000/11/29
- Re: Successful passing., Carl McLelland, 2000/11/29
Re: Peter Giddings, borrani, 2000/11/28
Possible Vintage Project, John A. Rollins, 2000/11/28
- Re: Possible Vintage Project, Calvin Krug, 2000/11/29
Re: Safety, JWoesvra, 2000/11/28
- Re: Safety, lwdent, 2000/11/29
- Re: Safety, WSpohn4, 2000/11/29
- Re: Safety, Tombread, 2000/11/29
- Re: Safety, lwdent, 2000/11/29
- Re: Safety, CooperS66, 2000/11/29
- Re: Safety, lwdent, 2000/11/29
- Re: Safety, WSpohn4, 2000/11/29
- Re: Safety, DSRGR, 2000/11/29
- Re: Safety, lwdent, 2000/11/29
- Re: Safety, lwdent, 2000/11/29
- Re: Safety, CooperS66, 2000/11/29
- Re: Safety, Don Queen, 2000/11/29
- Re: Safety, Gregory Nagy, 2000/11/29
- Re: Safety, John A. Rollins, 2000/11/29
- Re: Safety, WSpohn4, 2000/11/30
- Re: Safety, Don Marshall, 2000/11/30
- Re: Safety, JWoesvra, 2000/11/30
- Re: Safety, WSpohn4, 2000/11/30
- Re: Safety, Tony Drews, 2000/11/30
IN RE: Mechanical Failures, Carl McLelland, 2000/11/28
- Re: IN RE: Mechanical Failures, WSpohn4, 2000/11/28
- Re: IN RE: Mechanical Failures, PaceCars, 2000/11/28
- Re: IN RE: Mechanical Failures, WSpohn4, 2000/11/28
- Re: IN RE: Mechanical Failures, Tombread, 2000/11/28
- Re: IN RE: Mechanical Failures, Brian Evans, 2000/11/29
- Re: IN RE: Mechanical Failures, S800Racer, 2000/11/29
- Re: IN RE: Mechanical Failures, JWoesvra, 2000/11/29
- Re: IN RE: Mechanical Failures, Brett Johnson, 2000/11/29
- Re: IN RE: Mechanical Failures, Tombread, 2000/11/29
- Re: IN RE: Mechanical Failures, JWoesvra, 2000/11/29
- Re: IN RE: Mechanical Failures, Phil Trenholme, 2000/11/29
- Re: IN RE: Mechanical Failures, Marty Hutto, 2000/11/29
- Re: IN RE: Mechanical Failures, LMR356, 2000/11/29
- Fwd: Re: IN RE: Mechanical Failures, Brian Evans, 2000/11/30
- Re: IN RE: Mechanical Failures, Roger Sieling, 2000/11/30
- Re: IN RE: Mechanical Failures, JOHN HARDEN, 2000/11/30
- Re: IN RE: Mechanical Failures, S800Racer, 2000/11/30
- Re: IN RE: Mechanical Failures, WSpohn4, 2000/11/30
Speedvisioon coverage of Watkins and Lime Rock, John.Desantis, 2000/11/28
- Re: Speedvisioon coverage of Watkins and Lime Rock, Tombread, 2000/11/28
- Re: Speedvisioon coverage of Watkins and Lime Rock, Brian Evans, 2000/11/28
- Re: Speedvisioon coverage of Watkins and Lime Rock, LMR356, 2000/11/28
- Re: Speedvisioon coverage of Watkins and Lime Rock, Joseph_Chimbolo, 2000/11/28
- Re: Speedvisioon coverage of Watkins and Lime Rock, Derek Harling, 2000/11/28
- Re: Speedvisioon coverage of Watkins and Lime Rock, Derek Harling, 2000/11/28
- Re: Speedvisioon coverage of Watkins and Lime Rock, Derek Harling, 2000/11/28
- RE: Speedvisioon coverage of Watkins and Lime Rock, Jim Hill, 2000/11/28
- RE: Speedvisioon coverage of Watkins and Lime Rock, Kerry Seibert, 2000/11/28
- FW: Speedvisioon coverage of Watkins and Lime Rock, Baltimore Knife & Sword Co., 2000/11/28
- Re: Speedvisioon coverage of Watkins and Lime Rock, Tom M, 2000/11/28
- Re: Speedvisioon coverage of Watkins and Lime Rock, , 2000/11/28
- Re: Speedvisioon coverage of Watkins and Lime Rock, Charles Christ, 2000/11/29
- Re: Speedvisioon coverage of Watkins and Lime Rock, Jeff Brown, 2000/11/29
- Re: Speedvisioon coverage of Watkins and Lime Rock, lwdent, 2000/11/29
- Re: Speedvisioon coverage of Watkins and Lime Rock, S800Racer, 2000/11/29
- Re: Speedvisioon coverage of Watkins and Lime Rock, Tom M, 2000/11/29
- Re: Speedvisioon coverage of Watkins and Lime Rock, Derek Harling, 2000/11/29
- Re: Speedvisioon coverage of Watkins and Lime Rock, Derek Harling, 2000/11/29
- Re: Speedvisioon coverage of Watkins and Lime Rock, HealeyRic2, 2000/11/29
- Re: FW: Speedvisioon coverage of Watkins and Lime Rock, Roger Sieling, 2000/11/30
- FW: FW: Speedvisioon coverage of Watkins and Lime Rock, Baltimore Knife & Sword Co., 2000/11/30
British Parts failure etc. (AC), Dick Waite, 2000/11/28
Re: Mechanical Failures "or" vintage vrs modified, John.Desantis, 2000/11/28
Re: Mon. TV, Susan, 2000/11/27
The Italian Job, Bob Spruck, 2000/11/26
Re: Mechanical Failures, JWoesvra, 2000/11/26
- Re: Mechanical Failures, WATTSIT2ME, 2000/11/26
- Re: Mechanical Failures, lwdent, 2000/11/26
- Re: Mechanical Failures, Myles Winbigler, 2000/11/26
- Re: Mechanical Failures, RodsINTOMG, 2000/11/26
- Re: Mechanical Failures, WSpohn4, 2000/11/26
- Re: Mechanical Failures, Jack W. Drews, 2000/11/26
- Re: Mechanical Failures, Billd13, 2000/11/26
- Re: Mechanical Failures, Jim Hayes, 2000/11/26
- Re: Mechanical Failures, Jack W. Drews, 2000/11/26
- Re: Mechanical Failures, LMR356, 2000/11/26
- Re: Mechanical Failures, JWoesvra, 2000/11/26
- Re: Mechanical Failures, JWoesvra, 2000/11/27
- Re: Mechanical Failures, Richard E. Buckingham, Jr., 2000/11/27
- Re: Mechanical Failures, lwdent, 2000/11/27
- Re: Mechanical Failures, Charles Christ, 2000/11/27
- re: mechanical failures, Calvin Krug, 2000/11/27
- Re: Mechanical Failures, Mark Palmer, 2000/11/27
- Re: mechanical failures, JWoesvra, 2000/11/27
- Mechanical Failures, N197TR4, 2000/11/27
- Re: Mechanical Failures, Greg Solow, 2000/11/28
- Re: Mechanical Failures, Billd13, 2000/11/28
- Re: Mechanical Failures, JWoesvra, 2000/11/28
- RE: Re: mechanical failures, Rick.Yocum, 2000/11/28
- Re: mechanical failures, JWoesvra, 2000/11/28
- RE: mechanical failures, Pat Ryan, 2000/11/28
- Re: mechanical failures, JWoesvra, 2000/11/28
- Re: Mechanical Failures, Dan Mullin, 2000/11/28
- Re: Mechanical Failures, Richard E. Buckingham, Jr., 2000/11/28
test/ignore, WATTSIT2ME, 2000/11/25
Re: British parts failure update, JWoesvra, 2000/11/24
- Re: British parts failure update, JWoesvra, 2000/11/28
- Re: British parts failure update, JWoesvra, 2000/11/28
- Re: British parts failure update, Roger Sieling, 2000/11/28
- Re: British parts failure update, JOHN HARDEN, 2000/11/28
- Re: British parts failure update, JWoesvra, 2000/11/28
- Re: British parts failure update, Roger Sieling, 2000/11/28
- Re: British parts failure update, Mark Palmer, 2000/11/28
- Re: British parts failure update, Mark Palmer, 2000/11/28
- Re: British parts failure update, lwdent, 2000/11/29
Loss of a legend - Bill Devin, Sadek Charles H DLVA, 2000/11/24
- Re: Loss of a legend - Bill Devin, clark@dnf.com, 2000/11/24
gaskets, sealer, etc., William Hoskins, 2000/11/21
- Re: gaskets, sealer, etc., lwdent, 2000/11/21
- Re: gaskets, sealer, etc., Simon Favre, 2000/11/21
- Re: gaskets, sealer, etc., S800Racer, 2000/11/22
eastlake web site, Craig J. Froeter, 2000/11/20
- Re: eastlake web site, Bill5600, 2000/11/21
Hylomar, Robert Alder, 2000/11/20
Sealers, Robert Alder, 2000/11/20
- Re: Sealers, WSpohn4, 2000/11/20
- Re: Sealers, Gregory_Schulz, 2000/11/20
Gasket and Gasket-less Sealers - Summary, Derek Harling, 2000/11/20
- Re: Gasket and Gasket-less Sealers - Summary, lwdent, 2000/11/20
- Re: Gasket and Gasket-less Sealers - Summary, Chris Kantarjiev, 2000/11/20
- Re: Gasket and Gasket-less Sealers - Summary, MDunst/Gasket Works USA, 2000/11/21
gasket sealers, jim fuerstenberg, 2000/11/19
Re: Minibikes and pit bikes, Ron Schonscheck, 2000/11/19
- Minibikes and pit bikes, NeotoyRick, 2000/11/19
- Re: Minibikes and pit bikes, Roger Sieling, 2000/11/20
Clarification on Valve Cup information.., Steve Hammatt, 2000/11/19
- Re: Clarification on Valve Cup information.., WSpohn4, 2000/11/19
- Re: Clarification on Valve Cup information.., Steve Hammatt, 2000/11/19
- Re: Clarification on Valve Cup information.., Simon Favre, 2000/11/29
- Re: Clarification on Valve Cup information.., Steve Hammatt, 2000/11/29
- Re: Clarification on Valve Cup information.., Simon Favre, 2000/11/30
John Sutton/Sandia, KLynch7589, 2000/11/19
looking for info, Gregory Nagy, 2000/11/19
- Re: looking for info, Derek Harling, 2000/11/19
- Re: looking for info, Derek Harling, 2000/11/19
- Re: looking for info, Derek Harling, 2000/11/19
- Re: looking for info, Derek Harling, 2000/11/19
- Re: looking for info, Derek Harling, 2000/11/19
Jaguar engine specs, Steve Hammatt, 2000/11/19
- Re: Jaguar engine specs, APSF1, 2000/11/19
halon, BPHILLIP, 2000/11/19
BDA Escort Needed, Dean Tighe, 2000/11/19
- RE: BDA Escort Needed, Gerald J. Brazil, 2000/11/19
Lee Raskin are you out there ?, Don Queen, 2000/11/17
TR3/4 rolling Chassis wanted, EPaul21988, 2000/11/17
Gasket and Gasket-less Sealers, Derek Harling, 2000/11/17
- Gasket and Gasket-less Sealers, Derek Harling, 2000/11/17
- Re: Gasket and Gasket-less Sealers, MJSUKEY, 2000/11/19
- Re: Gasket and Gasket-less Sealers, Christopher H.Kang, MD, 2000/11/19
- Re: Gasket and Gasket-less Sealers, Simon Favre, 2000/11/20
- RE: Gasket and Gasket-less Sealers, Craig J. Froeter, 2000/11/20
New Address Test, Carl McLelland, 2000/11/16
Set-O-Carbs, Malaboge, 2000/11/15
- Re: Set-O-Carbs, RodsINTOMG, 2000/11/16
No vintage content - SR2 racing, Alfred, 2000/11/15
Mystery Vintage Race Car, Bob Schmitt, 2000/11/15
- Re: Mystery Vintage Race Car, , 2000/11/15
- Re: Mystery Vintage Race Car, Michael Frank, 2000/11/15
- Re: Mystery Vintage Race Car, Bob Schmitt, 2000/11/18
- Re: Mystery Vintage Race Car, PaceCars, 2000/11/19
- Re: Mystery Vintage Race Car, Udo Horn, 2000/11/19
Sabra parts?, DGreimel, 2000/11/14
Giotti Wheels, Eric Camiel, 2000/11/14
Vintage race car wanted, Bruce Fernie, 2000/11/14
- Vintage race car wanted, APSF1, 2000/11/14
Wanted to buy, Bruce Fernie, 2000/11/14
Is the Elva Courier still available?, HIM10, 2000/11/14
Fwd: re horsepower, Ralph Steinberg, 2000/11/13
- Re: Fwd: re horsepower, Craig Wright, 2000/11/13
horsepower, Ralph Steinberg, 2000/11/13
- Re: horsepower, Brian Evans, 2000/11/13
- Re: horsepower, S800Racer, 2000/11/13
- Re: horsepower, Phil Babcock, 2000/11/13
- Re: horsepower, Derek Harling, 2000/11/13
- Re: horsepower, Mark Palmer, 2000/11/13
- Re: horsepower, Mark Palmer, 2000/11/13
- Re: horsepower, Craig Wright, 2000/11/13
- Re: horsepower, Craig Wright, 2000/11/13
- Re: horsepower, Derek Harling, 2000/11/13
HSR Brumos Savannah, HSR 2001 Schedule, Vaughn Rockney, 2000/11/12
MGB aluminum hubs, Larry Hoy, 2000/11/10
Seats for TR3, Dave Brackin, 2000/11/10
- Re: Seats for TR3, Ccanepa50, 2000/11/10
- Re: Seats for TR3, lwdent, 2000/11/11
- Re: Seats for TR3, Brian Evans, 2000/11/13
F Ford bits for sale, VEENET, 2000/11/09
Re: go-fast Datsun 510s, Royce Miller, 2000/11/09
- Re: go-fast Datsun 510s, Bill Lawrence, 2000/11/09
- Re: go-fast Datsun 510s, SRL311guy, 2000/11/09
948 Head (cylinder that is), M&J ROSEN, 2000/11/08
(no subject), Bakeryoung, 2000/11/08
- Re: (no subject), Tom & Sharon Shirley, 2000/11/09
- Re: (no subject), Derek Harling, 2000/11/10
Needed - 70 Camaro right rear quarter panel, john.r.hildebrand, 2000/11/08
George Swift, Ron Yates, 2000/11/07
- George Swift, Ron Yates, 2000/11/30
Wilson Tilt Bed Trailer Pics...website, MHKitchen, 2000/11/07
Tilt Bed Trailer For Sale, MHKitchen, 2000/11/07
Re: Replica Cobras, et al, JWoesvra, 2000/11/07
- Re: Replica Cobras, et al, JWoesvra, 2000/11/08
- Re: Replica Cobras, et al, JWoesvra, 2000/11/08
- Re: Replica Cobras, et al, Walt Boeninger, 2000/11/08
Re: But IS it a Vintage Racer?, LMR356, 2000/11/07
Value of the high stake, David Laver, 2000/11/07
- Re: Value of the high stake, David Laver, 2000/11/07
- Re: Value of the high stake, David Laver, 2000/11/07
- Re: Value of the high stake, S800Racer, 2000/11/07
- Re: Value of the high stake, LMR356, 2000/11/07
- Re: Value of the high stake, Simon Favre, 2000/11/07
- Re: Value of the high stake, Tombread, 2000/11/07
- Re: Value of the high stake, Derek Harling, 2000/11/07
- Re: Value of the high stake, Walt Boeninger, 2000/11/07
- Re: Value of the high stake, Henry Bahn, 2000/11/07
- Re: Value of the high stake, David Laver, 2000/11/08
- Re: Value of the high stake, David Laver, 2000/11/08
But IS it a Vintage Racer? (was Eastlake), Derek Harling, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Tombread, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Wm. Severin Thompson, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Derek Harling, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Tombread, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Brian Evans, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Wm. Severin Thompson, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Tombread, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Jack W. Drews, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Brian Evans, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), S800Racer, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Roger Sieling, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Paul Meis, 2000/11/07
- RE: But IS it a Vintage Racer? (was Eastlake), Gerald J. Brazil, 2000/11/07
- RE: But IS it a Vintage Racer? (was Eastlake), Douglas W. Rudy, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), LMR356, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), LMR356, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Derek Harling, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Simon Favre, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Tombread, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Tombread, 2000/11/07
- RE: But IS it a Vintage Racer? (was Eastlake), Simon Favre, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Jack Rubin, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Tombread, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Tombread, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Derek Harling, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Jack Rubin, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), S800Racer, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), S800Racer, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Hugh Barber, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Simon Favre, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Jack W. Drews, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), tgrau, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Tombread, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Tombread, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), LMR356, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Simon Favre, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), Paul Fitzsimmons, 2000/11/07
- RE: But IS it a Vintage Racer? (was Eastlake), Larry Hoy, 2000/11/07
- Re: But IS it a Vintage Racer? (was Eastlake), David Laver, 2000/11/08
Davey Jordan/Jerry Titus at Sebring in 1963 with an Alpine, Steven Silverstein, 2000/11/06
What went wrong(86 suburban), Ccanepa50, 2000/11/06
What went wrong?, Carl McLelland, 2000/11/06
- Re: What went wrong?, Brian Evans, 2000/11/06
- Re: What went wrong?, Mark J Bradakis, 2000/11/06
- RE: Re: What went wrong?, Rick.Yocum, 2000/11/06
- RE: Re: What went wrong?, Brian Evans, 2000/11/06
- RE: Re: What went wrong?, Rick.Yocum, 2000/11/06
- Re: What went wrong?, Simon Favre, 2000/11/06
- Re: What went wrong?, lwdent, 2000/11/06
- Re: What went wrong?, Bob Spruck, 2000/11/07
RHD Mercedes 230 SL, VEENET, 2000/11/06
- Re: RHD Mercedes 230 SL, Bob Spruck, 2000/11/07
Chris Gleason, Andrew Antipas, 2000/11/06
Ford Anglia, Rabe, Joachim, 2000/11/06
recommend a transporter?, Tombread, 2000/11/05
- Re: recommend a transporter?, RobynPass, 2000/11/06
- Re: recommend a transporter?, HealeyRic2, 2000/11/07
- Re: recommend a transporter?, Tombread, 2000/11/07
Re: Moron the "Whatizzit Special", Bob Schmitt, 2000/11/05
Rims for Sunbeam, Steven Silverstein, 2000/11/05
brake bleeders, rodgers356, 2000/11/04
- Re: brake bleeders, Bryan Appleby, 2000/11/05
- Re: brake bleeders, RodsINTOMG, 2000/11/06
- Re: brake bleeders, MHKitchen, 2000/11/06
- Re: brake bleeders, NeotoyRick, 2000/11/07
- Re: brake bleeders, MHKitchen, 2000/11/07
Lotus Elan/Cortina dry sump?, PaceCars, 2000/11/04
- Re: Lotus Elan/Cortina dry sump?, lwdent, 2000/11/05
- RE: Lotus Elan/Cortina dry sump?, Pat Ryan, 2000/11/05
- Re: Lotus Elan/Cortina dry sump?, MHKitchen, 2000/11/06
26T Wheel for Cosworth Engine, Derek Harling, 2000/11/04
Re: Fiberglass fenders for Datsun roadsters., Bill Ironside, 2000/11/02
Eastlake, MalcolmCox, 2000/11/01
- Re: Eastlake, lwdent, 2000/11/02
- Re: Eastlake, Tom & Sharon Shirley, 2000/11/04
- Re: Eastlake, Bill5600, 2000/11/06
- Re: Eastlake, Gregory Nagy, 2000/11/07
- Eastlake, tgrau, 2000/11/07
- RE: Eastlake, Craig J. Froeter, 2000/11/07
- RE: Eastlake, Roger Sieling, 2000/11/08
accusumps, Lyle Rundhaug, 2000/11/01
- Re: accusumps, Robert Van Kirk, 2000/11/01
- Re: accusumps, Mike Jackson, 2000/11/01
- Re: accusumps, Brian Evans, 2000/11/02
- RE: accusumps, Sadek Charles H DLVA, 2000/11/05
- Re: accusumps, lwdent, 2000/11/05
- RE: accusumps, Gerald J. Brazil, 2000/11/05
- Re: accusumps, Phil Trenholme, 2000/11/06
- RE: accusumps, Sadek Charles H DLVA, 2000/11/07
- Re: accusumps, Jim Hayes, 2000/11/07
- Re: accusumps, Ron Schonscheck, 2000/11/07
- FW: accusumps, Sadek Charles H DLVA, 2000/11/09