triumphs
[Top] [All Lists]

Re: [TR] transmission installation

To: <terryrs@comcast.net>
Subject: Re: [TR] transmission installation
From: "Greg Lemon" <glemon@neb.rr.com>
Date: Mon, 1 Feb 2016 19:25:08 -0600
Cc: TR3 Triumphs <triumphs@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
Importance: Normal
References: <1520949516.12268996.1454110091808.JavaMail.zimbra@comcast.net> <4A.97.11583.2200CA65@cdptpa-oedge03> <001801d15af4$c4d37ed0$4e7a7c70$@flash.net> <1499554206.13886587.1454367930320.JavaMail.zimbra@comcast.net> <B0EE6C3A-8C79-4D0C-8268-B05F873F79DC@gmail.com>
When doin
























When doing it by myself, once I get it wrestled in and started with the 
input shaft started into the clutch, I make sure it is supported in some way 
from underneath, then I straddle the tunnel just behind the tranny, grasp 
the tail of the tranny by hand and push on the lip of the bell housing with 
my feet.  you can turn the tranny, as well as gently align things with you 
hands, and apply pressure with your feet so it goes in when it is all lined 
up.

Greg lemon


--------------------------------------------------
From: "Tom B" <tboggiano@gmail.com>
Sent: Monday, February 1, 2016 6:52 PM
To: <terryrs@comcast.net>
Cc: "TR3 Triumphs" <triumphs@autox.team.net>
Subject: Re: [TR] transmission installation

> Terry where are you located in NH. If you need a second set of hands I can 
> drive up and lend a hand depending on when you are installing.  The 
> transmission goes in really quickly with 4 hands
> Tom
>
>> On Feb 1, 2016, at 6:05 PM, terryrs@comcast.net wrote:
>>
>> Haven't wrestled so much since dating in high school.
>>
>> Installing a tranny back into the TR3A.  Alone.  Took some time to get it 
>> between the floor pans.  Went below on a creeper to make sure the shaft 
>> was going into the clutch teeth.  And that's where I got tired.
>>
>> Any best practice hints about how to line it up?  The first being, of 
>> course, to put the tranny in gear so twisting the drive line plate will 
>> turn the shaft to align with the teeth on the clutch.  I've done this 
>> before, but it's epic each time.
>>
>> ????
>>
>> Terry Smith, '59 TR3A
>> New Hampshire
>>
>> ** triumphs@autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: 
>> http://autox.team.net/mailman/options/triumphs/tboggiano@gmail.com
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/triumphs/glemon@neb.rr.com 


** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>