Terry where are you located in NH. If you need a second set of hands I can
drive up and lend a hand depending on when you are installing. The
transmission goes in really quickly with 4 hands
Tom
> On Feb 1, 2016, at 6:05 PM, terryrs@comcast.net wrote:
>
> Haven't wrestled so much since dating in high school.
>
> Installing a tranny back into the TR3A. Alone. Took some time to get it
> between the floor pans. Went below on a creeper to make sure the shaft was
> going into the clutch teeth. And that's where I got tired.
>
> Any best practice hints about how to line it up? The first being, of course,
> to put the tranny in gear so twisting the drive line plate will turn the
> shaft to align with the teeth on the clutch. I've done this before, but it's
> epic each time.
>
> ????
>
> Terry Smith, '59 TR3A
> New Hampshire
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/tboggiano@gmail.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|