triumphs
[Top] [All Lists]

Re: [TR] Re-Tapping Threads

To: Scott Suhring <suhringtr36@comcast.net>
Subject: Re: [TR] Re-Tapping Threads
From: pethier@comcast.net
Date: Tue, 20 Oct 2009 03:19:17 +0000 (UTC)
No, you can't do that.  You will lose all the strength in the hole.  You need 
to use a larger screw, or drill out the hole for a threaded insert.

I'd try harder to get the correct bolt.

Phil Ethier West Side Saint Paul Minnesota USA
1962 Triumph TR4 CT2846L   1979 Caterham 7
1993 Suburban  1994 Miata C-package  2007 Saturn Ion 3 2.4
http://www.triumphtransamerica.org.uk
http://forum.mnautox.com/forums   http://www.flickr.com/photos/pethier 

----- "Scott Suhring" <suhringtr36@comcast.net> wrote:

> From: "Scott Suhring" <suhringtr36@comcast.net>
> To: "Triumph Mail List" <triumphs@autox.team.net>
> Sent: Monday, October 19, 2009 9:07:23 PM GMT -06:00 US/Canada Central
> Subject: [TR] Re-Tapping Threads
>
> Can you re-tap threads using a smaller threads per inch tape? I have a
> screw
> hole that is a size #6 with 36 thread and I can only get a #6 screw
> with 32
> thread screw. Can I tap the 36 thread hole with a 32 tap and use the
> 32
> thread screw without messing up the threads?  Hope this is clear....
> 
> Scott Suhring
> Mechanicsburg, PA
> '70 TR6
> '59 TR3
> _______________________________________________
> 
> Support Team.Net  http://www.team.net/donate.html
> 
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
> 
> 
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
> 
> 
> http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>