I mounted mine on the frame under the drivers seat, removed the fuel pump
completely, Joe Alexander makes F/P blanking plates, I also have a pressure
regulator on the inside fender, then over to the carbs, only been like this
for about 15 years with not one single problem. "FT"
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|