Hi,
I am fitting a new Wizard Radiator into my TR3. It's gonna be a tight fit
unless I slightly lean it towards the driver. In other words, the top of the
radiator leans backwards (I have installed an electric fan), and is only
leaning about an 1" closer to the driver than the bottom of the radiator.
This insures that the radiator cap on the radiator's neck has sufficient
clearance from the bonnet when it's shut.
Is this allright for my driver TR3?
Thanks,
Paul Dorsey
60 TR3
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|