CarlSereda@aol.com wrote:
>Thanks guys for your TR4 license plate bolt position measurements (from
>bottom edge of trunk to centers of top license plate bolts).
>In general 8 1/4" to 8 3/16" seems to be the range.
>2 of my 7 holes are at 8.5" .. so I may need to make two more! (and lower)
>Thanks again,
>
I'd hoped Jonmac would recollect that license plate holes were all
drilled on Fridays during happy hour. So that they might be anywhere
from 8" to 8 1/2" and sometimes drilled into a door or front wing by
mistake. In which case, factory workers simply installed a side-view
mirror in the misplaced hole. :)
Steven Newell
Littleton, CO USA
'62 TR4 x 2
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|