Thanks, Bob. I'll check on availability of the brass nuts tomorrow.
And "Jar", I'll also look into the cost of a stud puller. Always wanted one,
but never had use for it before. Thanks.
Tom
>From: Bob Danielson <75TR6@tr6.danielsonfamily.org>
>Date: 2007/01/08 Mon PM 07:58:53 CST
>To: tom628@verizon.net, triumphs@autox.team.net
>Subject: RE: [TR] manifold studs
> Tom,
>Only thing I'd add is to use brass nuts along with the anti-seize. My
>understanding is that the dissimilar metals (steel studs & brass nuts) won't
>"bond" with time i.e rust together.
>
>
>Bob Danielson
>1975 TR6 CF38503U
>Converting to Throttle Body Injection
>http://tr6.danielsonfamily.org
>
>
>-----Original Message-----
>From: owner-triumphs@Autox.Team.Net [mailto:owner-triumphs@Autox.Team.Net]
>On Behalf Of Randall
>Sent: Monday, January 08, 2007 6:41 PM
>To: triumphs@autox.team.net
>Subject: RE: [TR] manifold studs
>
>> Ideally, I'd like to remove and replace all the studs in the head. Is
>> that feasible with out special tools?
>
>Normally yes, but it depends entirely on how badly they are corroded into
>place.
>
>> If so, should new studs be installed with red Locktite into the head,
>> and anti-sieze on the external threads?
>
>Personally, I would skip the red Loctite. Anti-seize is definitely a good
>idea, though.
>
>> --Or should I just leave well enough alone , and put everything
>> back the way it came out?
>
>If the only thing wrong with the studs that didn't come out is that they are
>stuck in the head, then I would leave them there. Chase the exposed ends
>with a suitable die, paint them with anti-seize, and put it back together.
>Save removing them for when you have the head off the engine, and can put it
>in a drill press to drill out the broken studs.
>
>But I would replace the ones that came out, along with the nuts (and all new
>lockwashers).
>
>Randall
>
>
>
>
>
>--
>No virus found in this outgoing message.
>Checked by AVG.
>Version: 7.5.433 / Virus Database: 268.16.7/619 - Release Date: 1/7/2007
>6:29 PM
>
>Your messages not reaching the list?
>Check out http://www.team.net/posting.html
>
>=== This list supported in part by The Vintage Triumph Register
>=== http://www.vtr.org
>
>=== Help keep Team.Net on the air: http://www.team.net/donate.html
>
>=== unsubscribe/change address requests to majordomo@autox.team.net
>=== Archives at http://www.team.net/archive
>=== http://www.team.net/the-local
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|