RE: TR3 Hi-torque starter

["Randall" <tr3driver@comcast.net>]

Randall wrote :
> The gear-drive unit is smaller in
> diameter, so I can change it without disturbing the exhaust.

Forgot to mention, I've got my bellhousing threaded (with a Helicoil) for the
upper starter bolt.  Otherwise you might need to undo some things to be able to
get to that @!#& nut.  Last time I dealt with the nut, I used a helper, a long
box-end wrench, and duct tape to hold the nut in place while I turned the bolt
from down below.

Randall