> Message text written by "T. S. White"
> >So I had a brainstorm. The fuel outlet in my tank has a direct line of
> sight with the filler cap. So I have epoxied a cork to the end of a
> dowell rod. I plan to plug the fuel outlet in the tank from the inside
> and then remove the lines and replace them. Then I will pull the dowell
> rod and the cork will unplug from the fuel outlet.
============================================================================
==
Electric fuel pump, 2 pieces of rubber fuel line, and 2 pieces of elec wire
w/aligator clips to a battery, a holding container, takes about 5 minutes to
unload a full tank of gas, with 100% no spills and neat clean job with no
worries. "FT"
|