I need to replumb the fuel line to my fuel tank. I did this already
with sttel braid line but I used old line and it is deteriorating. The
usual way would be to drain the ten gallons, or so, of gas out of the
tank first. This takes time, is awkward, and somewhat hzardous.
So I had a brainstorm. The fuel outlet in my tank has a direct line of
sight with the filler cap. So I have epoxied a cork to the end of a
dowell rod. I plan to plug the fuel outlet in the tank from the inside
and then remove the lines and replace them. Then I will pull the dowell
rod and the cork will unplug from the fuel outlet.
Sounds like a good plan, huh. Whadaya think? Thanks.
--
Best Regards,
Tom
|