Bill Stagg wrote :
> My connecting pipe between the water pump and lower radiator hose
> fitting is a little (ok, a lot) worse for the wear. I was not able to
> locate one through Moss, TRF, etc, and I'm wondering if a straight 1"
> pipe would work just as well as the Triumph part with the slight bend
> at the bottom.
Not sure if a straight pipe will fit , but it's not difficult to bend the pipe
with a little heat .
Bend first then cut to length .
It might be a good opportunity to add a fitting for a thermo switch for the
electric fan .
BTDT
Cheers
Mike
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|