Bill Stagg wrote :
> First, when I add the 5/6" rubber washers under the lower radiator
> mounting flanges, the hole for the handcrank in the radiator is higher
> than the crank bolt on the crankshaft, making it impossible for the
> handcrank to be used. There were no washers in position when I
> removed the radiator.
I believe that these washers are used mainly to align the top coolant hose
> My question is this: What do I lose if I give up use of the
> handcrank?
IMHO you don't lose much
Cheers
Mike
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|