David Massey wrote:
>
> ... try this: get a
> 3/8 inch allen wrench and a 3/8 inch socket with a 1/4 inch square drive.
Another alternative is a 1/4" drive, 1/4" 8 point socket; and a 1/4"
drive ratchet. Available at Sears and most tool stores. Much easier to
use IMO than the special tool. BTW, the special tool I got from Moss
was just a little too tight, I had to enlarge the hole a bit to get it
on my adjusters.
Randall
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|