triumphs
[Top] [All Lists]

Re: list etiquette and wire wheel tape

To: 105671.471@compuserve.com
Subject: Re: list etiquette and wire wheel tape
From: Philip E Bacon <pboldtrix@juno.com>
Date: Wed, 29 Nov 2000 21:02:07 -0500
Cc: 05671.471@compuserve.com, triumphs@autox.team.net
References: <200011292040_MC2-BC93-E89E@compuserve.com>
British Wire Wheel sells something called "Tube Protector Tape" for the
inside of wire wheels.  A "heavy duty PVC tape" which is to replace the
old style rubber bands  4" wide roll enough for five wheels ..   NFI etc,
blah blah  web site is <www.britishwirewheel.com> 


On Wed, 29 Nov 2000 20:39:52 -0500 David Massey
<105671.471@compuserve.com> writes:
>
>Message text written by INTERNET:TexasTR4@aol.com
>>I don't remember if this was the list I saw it discussed on, but I 
>thought
>
>the bottom line was that it was very similar to electrical tape, but 
>wider.
>
>I used electrical tape back in '69 and it worked then.  Should work 
>now I 
>would think.
>
>Someone also suggested silicone caulk on the end of each spoke, inside 
>the 
>wheel, to prevent rust from running down the spoke.  I guess this 
>would
>work 
>inside the splined hub to prevent grease running out too.
>
>RH
><
>
>The discussion I had (mostly off line) was that it was similar to
>electrical tape but heavier gauge and different in other ways.  The 
>seller
>said it was a much better product for the application (naturally) for 
>these
>and other reasons.  My tire guy says he uses electrical tape, too.  
>But If
>there is a better product I have to at least try to find it before 
>giving
>up.
>
>There are good and bad aspects to sealling the spokes.  The good is 
>that if
>you have to take the tire to someone who is not familiar with tubes 
>("sure,
>dude, we can, you know, fix your, like, tire, man") there are no 
>suprises -
>of course "what are all these, like, wire things, man?"
>
>The down side is that a leak in the seal is almost impossible to find. 
> I
>helped a friend seal up his using urethane seam sealer.  Easier to 
>work
>with and less prone to bunching as silicone RTV.  Me?  Just call me a
>traditionalist.  At least as far as the TR3 is concerned.
>
>Thanks for the reply.  I might resort to electrical tape before all is 
>said
>and done. (of course it is only after that point that I will find that 
>for
>which I am looking)
>
>Dave

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:

<Prev in Thread] Current Thread [Next in Thread>