Another point of use with the old box are the mounting brackets for
the dash support bracket/heater fan mounting bracket. The replacement
boxes do not have these attached. You can cut the original ones from
the box and weld them to the replacement.
Scott Suhring
Elizabethtown, PA
'70 TR6
'59 TR3
Jim Bauder wrote:
>
> Rich,
>
> I bought the ready made battery box from Moss or TRF for my TR3. When
> I went to mount it I found that the battery hold down brackets really
> thin and "tinny". The sides with the hold down brackets on the
> original one were better than the new one. So Randy and I just cut the
> sides off of the new one and the bottom and back out of the old one in
> the fire wall. Had the new one welded in and it looks very original.
>
> Works for me!
>
> Jim Bauder
> '58 TR3
> Palo Alto, CA
|