triumphs
[Top] [All Lists]

RE: heater fan motor

To: "Westerdale, Bob" <bwesterdale@edax.com>, <Lftlesl@aol.com>, <triumphs@autox.team.net>
Subject: RE: heater fan motor
From: "Andy Dixon" <amdixon@erols.com>
Date: Mon, 12 Jun 2000 16:35:54 -0400charset="iso-8859-1"
Importance: Normal
O.K. Bob,
it's not nice to put that kind of information on the list without the
specifics (if you still have them).
Andy

-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of Westerdale, Bob
Sent: Monday, June 12, 2000 3:31 PM
To: 'Lftlesl@aol.com'; triumphs@autox.team.net
Subject: RE: heater fan motor



Les-
        I recently had my heater core out for leak repair, and found that
the blower motor to be heavily water damaged, so I went to my local Parts
guy who let me look through his books until a domestic replacement was found
that seemed about the same size.   Made a little bracket to stabilize it and
used the same electrical hookup. Changed over the 4 blade fan ( 1/4" dia
shaft...) and it runs great.  More air than ever before.  Tip-  check the
core for leaks very thoroughly before reinstallation.
Good luck
        Bob Westerdale
        59 3A    TS36967E

--

I have the heater out of my TR3B, and am sanding and repainting it. How can
I
tell if the fan motor functions? Is it okay to hook it up to a 12 volt
battery, or is there some sort of relay I need? If the fan won't work, can
it
be repaired, or is there a source for the electric motor?
Thanks in advance,
Les Landon
1962 TR3B TCF644L
Baton Rouge, LA


<Prev in Thread] Current Thread [Next in Thread>