Malcolm,
It looks very much like that stuff... only soft and pliable (or maybe
compressible)
Brian Sanborn
62 TR4 CT16260L - Groton, MA
My TR4 Restoration Web Site
http://www.net1plus.com/users/sanborn/Home.html (Big Update on 6/13/99)
E-Mail: sanborn@net1plus.com
-----Original Message-----
From: Malcolm Walker <walker05@camosun.bc.ca>
To: sanborn@net1plus.com <sanborn@net1plus.com>
Cc: The Usual Suspects <triumphs@autox.team.net>
Date: Tuesday, June 22, 1999 12:38 PM
Subject: RE: Gauges
>On Tue, 22 Jun 1999 sanborn@net1plus.com wrote:
>
>> and supplied me with the o-rings for the outside of the
>> gauges and lengths of a hollow vinyl tubing that was used to
>> form the seal between the bezel and glass.
>>
>> If you can find a flexible small diameter tubing you could
>> use that. I could not locate it anywhere.
>
>Would heat-shrink tubing work? I got some small-diameter stuff (clear,
>even) when I got a grab-bag from Radio Shack.
>
>-Malcolm
>* There is a FAQ for this list! Its new home is:
>http://www.islandnet.com/~walker05/triumph/trfaq.htm
>
|