Dennis, I'm afraid to try heat. It might ruin the clear coat on the rims.
But if all else fails, I will try it out.
Thanks Roger
Dennis F. Kimberlin wrote:
> Roger,
> Before breaking, try putting heat, e.g. small propane torch, on the nut.
> Heat will cause expansion which usually breaks the rust bond that has
> formed. Used this many times with good results.
> If that doesn't work, cut the nut off and put a new stud in.
> Good luck.
> Dennis
> 75 SPIT
> Omaha, NE
--
Roger Helman 71 TR6 CC67866L
Digimation Inc. http://deepthought.digimation.com/rogerh/
New Orleans La.
www.digimation.com
Voice. 504.468.7898
Fax. 504.468.5494
|