--===============3365783328510556826==
--00000000000014b64205c63d6029
Yes, Fram ph3600 or Ford FL400 will fit without grinding the engine mount.
On Sat, Jul 3, 2021, 3:41 PM Terry Lawell <tlawell@austin.rr.com> wrote:
> Hi Ron,
>
> It turns out Summit had the right adapter for the kit, the sales
> person just didn't know it. They have sent the adapter to me and it fits
> correctly in the block as well as in the kit. The only problem was the
> oil filter they sent me was incorrect - it hits up against the oil pan.
> Is it the ph3600 that is slimmer and fits that kit?
> I also found another problem - the oil line from the oil pressure
> gauge was cracked and leaking. when I disconnected the oil line fitting,
> I also took off the fitting that goes into the block. It was very
> difficult to get off and I am concerned that someone either put a
> fitting in there with the wrong threads or stripped the threads when
> they installed it. Do you know what size those threads are? It appears
> to be a british standard pipe thread. I had to use whitworth wrenches to
> get both the pressure fitting nut and the fitting to the block off. Any
> info on these fittings would be much appreciated.
>
> Cheers, Terry
>
>
> On 7/3/21, 7:45 AM, Ron Fraser wrote:
> > Terry
> > 1st - I would contact Summit to make sure that oil filter kit did
> > not come with an adaptor or if it is missing from your kit.
> > 2nd - does Summit have the adaptor needed for this kit?
> >
> > C20Z 6890-C seems to be the Ford part number for the adaptor - 3/4 x16
> > thread and 1 1/16 x 12 thread
> > You need to check that this is correct for your oil filter kit.
> >
> >
> https://www.npdlink.com/search/products?search_terms=fitting%2Boil%2Bfilter&;
> > top_parent=200001&year=
> >
> > see if 6890-A is the part you need.
> >
> > Ron Fraser
> >
> > -----Original Message-----
> > From: Tigers <tigers-bounces@autox.team.net> On Behalf Of Terry Lawell
> via
> > Tigers
> > Sent: Thursday, July 01, 2021 8:34 PM
> > To: tigers@autox.team.net
> > Subject: [Tigers] 90 degree oil filter adaptor
> >
> > I purchased a 90 degree oil filter adapter from Summit Racing and when it
> > arrived I realized it did not have the adapter for the block, though the
> > salesman told me it came with it. Does anyone know where I can get the
> > adapter? I think it is 1.16" threads to the block and 13/16" threads to
> the
> > adapter.
> >
> > Cheers, Terry
> > _______________________________________________
> >
> > tigers@autox.team.net
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
> >
> > Unsubscribe:
> > http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
> >
> >
> >
>
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/sabre2tgr@gmail.com
>
>
>
--00000000000014b64205c63d6029
Content-Transfer-Encoding: quoted-printable
<div dir=3D"auto">Yes, Fram ph3600 or Ford FL400 will fit without grinding =
the engine mount.</div><br><div class=3D"gmail_quote"><div dir=3D"ltr" clas=
s=3D"gmail_attr">On Sat, Jul 3, 2021, 3:41 PM Terry Lawell <<a href=3D"m=
ailto:tlawell@austin.rr.com">tlawell@austin.rr.com</a>> wrote:<br></div>=
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p=
x #ccc solid;padding-left:1ex">Hi Ron,<br>
<br>
=C2=A0 It turns out Summit had the right adapter for the kit, the sales <br=
>
person just didn't know it. They have sent the adapter to me and it fit=
s <br>
correctly in the block as well as in the kit. The only problem was the <br>
oil filter they sent me was incorrect - it hits up against the oil pan. <br=
>
Is it the ph3600 that is slimmer and fits that kit?<br>
=C2=A0 I also found another problem - the oil line from the oil pressure <b=
r>
gauge was cracked and leaking. when I disconnected the oil line fitting, <b=
r>
I also took off the fitting that goes into the block. It was very <br>
difficult to get off and I am concerned that someone either put a <br>
fitting in there with the wrong threads or stripped the threads when <br>
they installed it. Do you know what size those threads are? It appears <br>
to be a british standard pipe thread. I had to use whitworth wrenches to <b=
r>
get both the pressure fitting nut and the fitting to the block off. Any <br=
>
info on these fittings would be much appreciated.<br>
<br>
Cheers, Terry<br>
<br>
<br>
On 7/3/21, 7:45 AM, Ron Fraser wrote:<br>
> Terry<br>
>=C2=A0 =C2=A0 =C2=A0 =C2=A01st -=C2=A0 I would contact Summit to make s=
ure that oil filter kit did<br>
> not come with an adaptor or if it is missing from your kit.<br>
> 2nd -=C2=A0 does Summit have the adaptor needed for this kit?<br>
><br>
> C20Z 6890-C seems to be the Ford part number for the adaptor - 3/4 x16=
<br>
> thread and 1 1/16 x 12 thread<br>
> You need to check that this is correct for your oil filter kit.<br>
><br>
> <a href=3D"https://www.npdlink.com/search/products?search_terms=3Dfitt=
ing%2Boil%2Bfilter&" rel=3D"noreferrer noreferrer" target=3D"_blank">ht=
tps://www.npdlink.com/search/products?search_terms=3Dfitting%2Boil%2Bfilter=
&</a><br>
> top_parent=3D200001&year=3D<br>
><br>
> see if 6890-A is the part you need.<br>
><br>
> Ron Fraser<br>
><br>
> -----Original Message-----<br>
> From: Tigers <<a href=3D"mailto:tigers-bounces@autox.team.net"; targ=
et=3D"_blank" rel=3D"noreferrer">tigers-bounces@autox.team.net</a>> On B=
ehalf Of Terry Lawell via<br>
> Tigers<br>
> Sent: Thursday, July 01, 2021 8:34 PM<br>
> To: <a href=3D"mailto:tigers@autox.team.net"; target=3D"_blank" rel=3D"=
noreferrer">tigers@autox.team.net</a><br>
> Subject: [Tigers] 90 degree oil filter adaptor<br>
><br>
> I purchased a 90 degree oil filter adapter from Summit Racing and when=
it<br>
> arrived I realized it did not have the adapter for the block, though t=
he<br>
> salesman told me it came with it. Does anyone know where I can get the=
<br>
> adapter? I think it is 1.16" threads to the block and 13/16"=
threads to the<br>
> adapter.<br>
><br>
> Cheers, Terry<br>
> _______________________________________________<br>
><br>
> <a href=3D"mailto:tigers@autox.team.net"; target=3D"_blank" rel=3D"nore=
ferrer">tigers@autox.team.net</a><br>
><br>
> Donate: <a href=3D"http://www.team.net/donate.html"; rel=3D"noreferrer =
noreferrer" target=3D"_blank">http://www.team.net/donate.html</a><br>
> Archive: <a href=3D"http://www.team.net/pipermail/tigers"; rel=3D"noref=
errer noreferrer" target=3D"_blank">http://www.team.net/pipermail/tigers</a=
> <a href=3D"http://autox.team.net/archive"; rel=3D"noreferrer noreferrer" t=
arget=3D"_blank">http://autox.team.net/archive</a><br>
><br>
> Unsubscribe:<br>
> <a href=3D"http://autox.team.net/mailman/options/tigers/rfraser@bluefr=
og.com" rel=3D"noreferrer noreferrer" target=3D"_blank">http://autox.team.n=
et/mailman/options/tigers/rfraser@bluefrog.com</a><br>
><br>
><br>
><br>
<br>
_______________________________________________<br>
<br>
<a href=3D"mailto:tigers@autox.team.net"; target=3D"_blank" rel=3D"noreferre=
r">tigers@autox.team.net</a><br>
<br>
errer" target=3D"_blank">http://www.team.net/donate.html</a><br>
Archive: <a href=3D"http://www.team.net/pipermail/tigers"; rel=3D"noreferrer=
noreferrer" target=3D"_blank">http://www.team.net/pipermail/tigers</a> <a =
href=3D"http://autox.team.net/archive"; rel=3D"noreferrer noreferrer" target=
=3D"_blank">http://autox.team.net/archive</a><br>
<br>
Unsubscribe: <a href=3D"http://autox.team.net/mailman/options/tigers/sabre2=
tgr@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank">http://autox=
.team.net/mailman/options/tigers/sabre2tgr@gmail.com</a><br>
<br>
<br>
</blockquote></div>
--00000000000014b64205c63d6029--
--===============3365783328510556826==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
--===============3365783328510556826==--
|