I actually don't have this problem - I just wanted a left-hand set of
drill bits.
thanks,
Paul
"Jerry & Maureen \(Mo\)" <JCMC2006@suddenlink.net> wrote on 08/17/2009
12:58:44 PM:
> Paul,
>
> Trying to remove an easy out with a drill bit might be a big challenge.
Easy
> outs are harder than most drills, not withstanding carbide. You haven't
> said what size the broken stud is; if it's small (like less than 1/4
inch) I
> have had good luck using a Dremel tool with diamond bits (burs) (Harbor
> Freight, like item #36252-1ADH) use lots of cooling fluid. In fact you
could
> use that super duper penetrating combo of ATF/acetone (50/50 mix) that
guys
> were talking about a while ago. Just don't get it so hot that the
acetone
> ignites. HA. That might even make getting the stud out easer also. You
> could also use WD-40; the main thing is to keep the tool cool.
> If the stud is bigger you could still use a bur it would just take
longer.
>
> Good luck
>
> Jerry Christopherson
> 9473187
>
>
>
>
> -----Original Message-----
> From: tigers-bounces@autox.team.net
[mailto:tigers-bounces@autox.team.net]
> On Behalf Of Paul.Tonizzo@sybase.com
> Sent: Monday, August 17, 2009 8:27 AM
> To: tigers@autox.team.net
> Subject: [Tigers] easy outs
>
> Do you have a web source for left-hand drill bits? I have never had luck
> finding them.
>
> thanks,
>
> Paul
>
>
> > From: "Clyde McLaughlin" <clydemclaughlin@verizon.net>
> > Subject: [Tigers] easy outs
> > To: <tigers@autox.team.net>
> > Message-ID: <004601ca1ddf$229c46a0$0201a8c0@chesapeake4>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > If any one has these in there tool box through them away, buy a left
> hand
> > set of drill bits, a quality high speed carbide bit will remove it,
but
> it
> > takes awhile, Clyde
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as jcmc2006@suddenlink.net
>
> Tigers@autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|