Steve,
Sorry I wasn't clear. I am referring to the cap that
mounts in place of the oil filter. Specifically the
hollow "bolt" that attaches the assembly to the block.
The leak is around the O ring located on the "bolt".
Are you aware of any other bypass adaptors that will
replace this piece. I found one in the JEGS catalog
that looks like it might work. However, I'm getting
tired of spending $$ on things that end up on the
shelf because they won't fit.
Your insight is appreciated.
Scott
--- Steve Laifman <SLaifman@SoCal.RR.com> wrote:
> Scott,
>
> It is not clear, to me, from your description just
> which "cast iron
> fitting" you are discussing.
>
> There is the oil filter cap, which is cast iron, the
> freeze plugs, which
> are not, the oil pressure pick-up, the drain valve.
> Not sure what else
> is on the side of the block, but lots of pieces on
> the front. Hardly any
> are cast iron.
>
> Could you be a bit more specific.
> --
> Steve Laifman < Find out what is most >
> B9472289 < important in your life >
> < and don't let it
> get away!>
> <SLaifman@SoCal.RR.com>
>
<http://www.TigersUnited.com/gallery/SteveLaifman.asp>
>
> _/_/_/_/_/_/_/
> _/ _/_/_/ _/_/_/ _/
> _/ _/ _/ _/ _/ _/
> _/_/_/_/
> _/ _/ _/ _/ _/ _/ _/
> _/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
> _/
> _/_/_/
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
|