Brad Fornal wrote:
> My question is, will the brake line from the master to the brake block
> (looks about long enough) work? Are the fittings the same on the block
> as on the clutch slave?
Brad
If it is all original, like no 1275 slave with the hose, and the
original brake master, yes the lines are the same.
I think the clutch line is longer then the brake line.
Brake line is 60" (I just bought one last week at the local parts
store.) 60 is the longest they sell.
But you can re-route it out of the master, down under the heater away
from the battery (which eats them up) and down to the slave.
If you have the 7/8" slave hard piped to the master, you can do it.
--
Frank Clarici
Toms River, NJ
2 Sprites, 2 Midgets
http://www.exit109.com/~spritenut
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|