spridgets
[Top] [All Lists]

Re: Body Work Preparation - Rust and Bondo

To: pixelsmith@gerardsgarage.com, michael.graziano@csfb.com, spridgets@autox.team.net
Subject: Re: Body Work Preparation - Rust and Bondo
Date: Fri, 15 Sep 2000 17:47:25 EDT
Cc: mgs@autox.team.net, spitfires@autox.team.net
In a message dated 9/15/2000 1:06:48 PM Eastern Daylight Time, 
pixelsmith@gerardsgarage.com writes:

<<  Any holes should be reinforced with
 some sore of mesh.  >>

Actually holes should be filled in with weld or welded-in patches so there is 
no chance of moisture entering your work from behind, where you will not be 
sealing and painting,  All filling should be done over a solid metal backing.

--David C.

<Prev in Thread] Current Thread [Next in Thread>