Jeff, I recently added a drain plug, It was relatively easy but then I
did take the diff out the car, split it apart and had access to a drill
press to do it. Not sure if I would do it under the car. There was a
fair amount off swarf created and I would not want that inside my diff.
Alan
Jeff McNeal wrote
>How tough is it to drill and tap a drain hole through cast iron? I'm
>wondering if now might be a good time to do this and fit a magnetic plug, just
>for good measure.
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|