Guys,
I'm going to refinish my dash in the next week or so and wanted to see if
there are any good tips, or things to avoid, etc. before I begin. It's an '80
and some of the veneer has a few cracks and some small chips, but no warping.
I'm planning on removing the old veneer and then applying new Walnut veneer
with a cherry stain, and then finishing it with about 5 coats of a good
semi-gloss marine polyurethene with all the usual wet sanding and ample drying
time between coats. I plan on using white transfer "prestype" for the "LIGHTS"
lettering before the poly. Any BTDT advice would be appreciated. I'll also
document and photo the exercise. TIA
Dave Willner
59 TR3A Apple Green
80 Spitfire Carmine Red
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|