spitfires
[Top] [All Lists]

Re: Compressor size

To: <BrYarboro@aol.com>, <spitfires@autox.team.net>
Subject: Re: Compressor size
From: "Mike Chambers" <mikech@sprynet.com>
Date: Tue, 4 Jun 2002 20:44:24 -0600
I have the compressor your talking about.  It works fine for me for any of
the work you listed.  It's kind of loud and runs a lot if you use an angle
grinder or air ratchet for an extend time period. I would recommend it if
you only have 120 volt.  If you have 240 volt I would go with a 60 gallon
upright.
MikeC



> Hi fellow Spitophiles;
> I'm in the market for an air compressor. Sears has a good sale for a 33
> gallon, 150 PSI, 120 volt, machine, putting out 8.6 SCFM @ 40 PSI, and 6.8
@
> 90 PSI.
> My question is will this be adequate for my purposes which are: general
tool
> work, ie. rachet, impact wrench; painting the Spit; sandblasting, and etc.
> TIA
> Brian Yarborough

///  spitfires@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>