At 10:13 PM 5/22/99 -0700, Huw Upshall wrote:
>
>I have something loose in my gas tank and I think it's the float. How do I
>take the circular float plug out of the side of the gas tank? (1500). It
>looks as if there are three indentations on the plug and three
>corrosponding grooves on the outside tank. How do you twist the inner plug
>to line up with the tank??
Huw,
The sending unit is attached to the large circular plate in the tank.
There should be a clamp ring that goes around the opening and clamps the
tank and the sending unit in place. Be very careful, use a brass drift,
YOU DON'T WANT ANY SPARKS!!! Look for a raised piece on the clamp ring,
then using the brass drift, hit it with a hammer until it unscrews. Then
lift the sending unit out.
John
John T. Blair WA4OHZ email: jblair@exis.net
Va. Beach, Va Phone: (757) 495-8229
48 TR1800 65 Morgan 4/4 Series V (B1109)
71 Saab Sonett III (71500840) 75 Bricklin SV1 (0887) 77 Spitfire
Morgan: www.team.net/www/morgan
Bricklin: webus80.wang.com/BI (new adderss)
|