You forgot step 1B: Carefully tip the welder to one side so that the bottom of
the door will clear the lip on the side of the welder cart.
Doug
--- On Wed, 2/4/09, Arvid Jedlicka <arvidj@visi.com> wrote:
> From: Arvid Jedlicka <arvidj@visi.com>
> Subject: Re: [Shop-talk] Basic MIG Welding questions
> To: "Mark Andy" <mark@sccaprepared.com>, "Marc" <smarc@smarc.net>
> Cc: "Shop Talk List" <shop-talk@autox.team.net>
> Date: Wednesday, February 4, 2009, 12:31 PM
> I must have missed it in the manual the first time I read
> it. Upon review I see that my Lincoln PowerMig 300 manual
> suggests:
>
> (1) Take all the stuff that you have allowed to accumulate
> on the the top of the welder and put it someplace else in
> the garage so that you can ...
>
> (2) Swing up and open the gull wing doors so that you can
> ...
>
> (3) Flip up the feed roller clamp so that you can ...
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|