Re: Engineering 101

[LSAPEX@aol.com]

_http://www.mcmaster.com/_ (http://www.mcmaster.com/)  Search  bevel gears?

>   What I need to figure out is how to make a  90degree turn and turn a shaft
> with some gears.  I have a  1/2" shaft coming out of a I-beam that goes into
> a frame about 4  inches, it needs to turn a threaded rod that is at
> 90degrees to  that shaft.

They're called bevel gears.

--
David  Scheidt





Les
apexautoeng.com