I had the same problem with por 15, I followed all instructions,
it looks great but if I drill any holes in the frame it pulls up a strip
of por 15
"Rob, Margie, Nick & Andrea" wrote:
> On Sun, 7 Mar 1999 22:49:49 -0500, you wrote:
>
> >I, too, have used Duro Extend & I've found that it peels off easily. They
> >say that you don't have to remove all rust, just the scaly stuff & then
> >apply, but I can't help but think that the rust dust kept it from adhering
> >real good. I did clean much of the rust off before I put it on too. I
> >would try POR 15 before trying Extend again. From what list members are
> >experiencing & what I've seen at shows, it is now the best thing available
> >to fight rust.
>
> I will second everything you say, including the peeling off of Extend. It was
> almost as if it was more like a rubber cement than a rust killer. Now POR15
>is
> another story. It truly lives up to its reputation. You can't remove it if
> your life depends on it.
>
> Rob
> >
> >Regards,
> >Doug Pewterbaugh
> >dpewter@msn.com
> >Denton, TX
> >49 3104 216 5-window
> >-----Original Message-----
> >From: Wayne Osborne <wcosborne@inetnow.net>
> >To: oletrucks@autox.team.net <oletrucks@autox.team.net>
> >Date: Sunday, March 07, 1999 6:35 AM
> >Subject: Re: [oletrucks] Rust
> >
> >
> >>I have used the product he mentions called Extend. I've never used
> >>the POR 15 that has been discussed on the list before, but I don't see
> >>how it can work much better than the Extend. I've had it on some
> >>areas underneath my truck for well over 5 years and the results are
> >>still astounding....Wayne
> >>
> >>
> >>At 10:22 AM 3/6/99 -0600, you wrote:
> >>>Humidity realy gets us in the southcental area. I had my body andparts
> >>> sand blasted. I had the blaster prime the whole thing immediately before
> >>>it started rusting. A pal of mine did a '57 restoration including sand
> >>>blasting. The day he picked really himid and about to rain. According
> >>> to him the color of the bear metal changed to a orange/red during the
> >>>trailering home.
> >>>
> >>>I have been getting a good result with a product called "Extend". It
> >>>comes in aero and brush. I cut out lots of wasted panel for sure. In
> >>> some areas less damaged I cleaned up the loose scale and treated
> >>> it with Extend. Its another of those that turn the base metal and
> >remaining
> >>> rust black, reportedly "bonding" the metal and hard rust together.
> >>> Its rock hard and paintable after drying. I have found it at NAPA and
> >>> a few other parts stores. I have only one (mild) winter for personal
> >>>tests but it looks pretty good.
> >>>
> >>>Lonnie
> >>>one post cancer patient, '53 Chevy
> >>>
> >>>
> >>>----- Original Message -----
> >>>From: Charles Culver <sculver@iwl.net>
> >>>To: <oletrucks@autox.team.net>
> >>>Sent: Saturday, March 06, 1999 10:29 AM
> >>>Subject: Fw: [oletrucks] Rust
> >>>
> >>>
> >>>>Being down here on the coast, we live with rust. We have a big marine
> >>>>industry, and a popular product to use against rust is Ospho. I've used
> >>>it,
> >>>>and it works great to stop and kill rust. Actually oxidized the existing
> >>>>rust, and turns it black. Then you paint it. The cost for a half gallon
> >>>>jug is about $16. Works for me-
> >>>>
> >>>>Smokey-League City, Texas (Galveston County)
> >>>>'50 3600 5-window
> >>>>
> >>>>-----Original Message-----
> >>>>From: Advdesign1@aol.com <Advdesign1@aol.com>
> >>>>To: rgilbertso@earthlink.net <rgilbertso@earthlink.net>;
> >>>>oletrucks@autox.team.net <oletrucks@autox.team.net>
> >>>>Date: Saturday, March 06, 1999 3:49 AM
> >>>>Subject: Re: [oletrucks] Rust
> >>>>
> >>>>
> >>>>>
> >>>>>
> >>>>><< Once rust starts does it just continue to spread by itself or does it
> >>>>> need to have more moisture to spread? >>
> >>>>>
> >>>>>It will continue to spread. this is called creep. the rate of creep
> >>>>depends
> >>>>>on humidity, composition of steel, and adhesion of paint. I believe
> >>>>>permeability of paint ot oxygen is also a factor but never saw this
> >>>>>discussed.
> >>>>>
> >>>>>Bob ADler
> >>>>>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> >>>>
> >>>>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> >>>>
> >>>
> >>>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> >>>
> >>
> >>---------
> >> http://www.chevytrucks.org/users/wayne
> >>For a quick view of oletrucks mailing list members trucks go to:
> >> http://www.chevytrucks.org/users/wayne/member.html
> >>
> >>
> >>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> >
> >
> >oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|