Hans,
I don't want to get rid of the switch, just get it out to fix or replace.
Haven't been able to get at it to remove it. It's pretty tight where it's
located and I wondered if the springy wire that I feel from the bottom of
the switch is related to getting it out. I have replaced my headlight
switch and that one I got out with a screw driver and lots of contortions
and not a small amount of blood. The metal bracing that holds the radio
console in place is really in the way to see or feel much.
Dave 72 B
-----Original Message-----
From: Duinhoven_Hans@emc.com <Duinhoven_Hans@emc.com>
To: djw69@idt.net <djw69@idt.net>; mgs@autox.team.net <mgs@autox.team.net>
Date: Wednesday, April 19, 2000 8:35 AM
Subject: RE: Heater fan switch
>Do not remove it Dave,
>
>If the switch is faulty, it is easier and cheaper to fix the switch itself.
>Remove the rocker. This can be done by making it loose from the housing at
>the pivot point with a screwdriver.
>Be carefull to be able to catch all things which may come out!
>Once you have got all things out, it's time for a thorough cleaning
session.
>You can use white spirit - don't get drunk!
>
>After this is done, apply a small amount of lightweight grease to the
moving
>part and reassemble everything together again. The switch should work now,
>although a quick flipping of the rocker is essential - mine sometimes still
>is sticky when operated slowly. It works still however.
>One of the former Dutch listers had made a relay in this circuit, which
>improved the fan efficiency very much. (replacing the poor contact
>interconnectivity bullet connectors might help even better I think - the
>same as a brake booster does not improve faulty brakes....)
>
>Good luck!
>
>
>Cheers,
>
>Hans
>
>'71 BGT
>
>been there - done it
>
>
>-----Original Message-----
>From: Dave Wood [mailto:djw69@idt.net]
>Sent: woensdag 19 april 2000 17:17
>To: MGB
>Subject: Heater fan switch
>
>
>Is there a trick to removing the heater fan switch? I have a 72 B and have
>removed the heater flow control and the console with the radio and still
>can't get the switch out. It feels like there is a wire retainer of some
>sort on the back of the switch but so far can't get my fingers in place to
>do anything with it.
>
>Thanks for your help.
>
>Dave
>
>
|