Thanks for all the help. I may get that sob out yet. I've already removed
everything in the way of my choke, which I will replace as soon as Proper MG
gets my parts to me.
Dave 72 B
-----Original Message-----
From: j r overcash <jroverca@earthlink.net>
To: Dave Wood <djw69@idt.net>
Date: Wednesday, April 19, 2000 10:25 AM
Subject: RE: Heater fan switch
>There is a retaining clip on the back of the switch. This holds it into
the
>dash. If yo have VB's MG40 catalog look on page 69. If your dash has
the
>center air vent opening remove the grill and you should be able to locate
>the rear of the switch and pull off the clip. The clip is located in the
>lower half of the page item number 2. If you have the MOss Cat I'm using
>the MGB 11 edition it ias on page 64
>
>Safety Fast
>Ross Overcash,74B,NAMGBR 2-1172
>Ayer, MA
>http://home.earthlink.net/~jroverca/index.html
>
>> -----Original Message-----
>> From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net]On
>> Behalf Of Dave Wood
>> Sent: Wednesday, April 19, 2000 11:17 AM
>> To: MGB
>> Subject: Heater fan switch
>>
>>
>> Is there a trick to removing the heater fan switch? I have a 72
>> B and have
>> removed the heater flow control and the console with the radio and still
>> can't get the switch out. It feels like there is a wire retainer of some
>> sort on the back of the switch but so far can't get my fingers in place
to
>> do anything with it.
>>
>> Thanks for your help.
>>
>> Dave
>>
>>
>>
>
>
|