David,
Thanks. I wondered what this was and, duh, never made the connection.
Bob
On Tue, 2 May 2000 22:53:01 +0100 "david.tinker"
<david.tinker@virgin.net> writes:
> The stop-clutch pedal you refer to is located in the pedal box welded
> to the
> side of the chassis . If you examine the pedal box you should see a
> slot in
> the bottom directly beneath the clutch pedal, in which fits a stop
> about
> 12mm dia x 20mm long with a male thread on one end for a washer and
> nut.
> This stop prevents the clutch pedal from going back too far. It is
> often
> left out during restorations.
>
> Hope this helps
>
> Regards
>
> David Tinker
>
|