Re: Re: TD Clutch Cable VS Clutch Levers

["david.tinker" <david.tinker@virgin.net>]

The stop-clutch pedal you refer to is located in the pedal box welded to the
side of the chassis . If you examine the pedal box you should see a slot in
the bottom directly beneath the clutch pedal, in which fits a stop about
12mm dia x 20mm long with a male thread on one end for a washer and nut.
This stop prevents the clutch pedal from going back too far. It is often
left out during restorations.

Hope this helps

Regards

David Tinker