In a message dated 10/13/01 1:23:31 AM Central Daylight Time,
popms@thegrid.net writes:
<< Larry, Brownfield heads are now Air Flow Research. Does the heads you
have use guide plates? The early brownfields use guide plates that are
different spacing than chevys. I have some old ones around the shop but
not enough to make a whole set. Off set lifters can only take some of
the misalignment out of the push rods. Doug Odom in big ditch
>>
Doug I have the guide plates. You state that the offset lifters can only take
some of the misalignment out. What do you do for the rest,offset rocker arms?
I did some measuring this morning and it looks like the exhaust line up with
the rocker stud but the intake is .135 out of line. Something that I found
interesting is on a stock set of chevy heads the center on the studs and the
center on the valves are off about .100 also. I guess I will call AFR Mon and
find out what I need. Thanks to all that took the time to help. Larry Mac
///
/// land-speed@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe land-speed
///
/// or go to http://www.team.net/cgi-bin/majorcool
///
///
|