Brads C motor that we ran at Muroc and Maxton has Brownfield heads... and
Comp Cam Stainless rockers... The Rodeck uses offset lifters and offset
rockers... but they were designed for 18 degree heads Larry..... I wonder
what that set of lifters went to? were they for a standard 23 degree
motor? the Brownfields aren't offset that far....
K
----------
> From: LGMCAFEE@aol.com
> To: land-speed@autox.team.net
> Subject: offset lifters
> Date: Friday, October 12, 2001 8:51 AM
>
> List, I have bought a set of brownfield heads for a small block chevy and
had
> a set of shaft mount rocker arms that I was going to use. When I started
to
> install them they wouldn't fit, the valves are not in the stock location.
Now
> my question is do I need offset lifters also and are they a standard
offset
> or do I need a special lifter for this application. I am going to use
roller
> lifters, I know this is basic stuff but I have never used offset valves.
> Thanks Larry Mac
///
/// land-speed@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe land-speed
///
/// or go to http://www.team.net/cgi-bin/majorcool
///
///
|