call them Rockers instead..... what can you say.... I was thinking and
typing... NOT GOOD..... K
----------
> From: Keith Turk <kturk@ala.net>
> To: LGMCAFEE@aol.com; land-speed@autox.team.net
> Subject: Re: offset lifters
> Date: Friday, October 12, 2001 9:23 AM
>
> Brads C motor that we ran at Muroc and Maxton has Brownfield heads... and
> Comp Cam Stainless rockers... The Rodeck uses offset lifters and offset
> rockers... but they were designed for 18 degree heads Larry..... I wonder
> what that set of lifters went to? were they for a standard 23 degree
> motor? the Brownfields aren't offset that far....
>
> K
>
>
> ----------
> > From: LGMCAFEE@aol.com
> > To: land-speed@autox.team.net
> > Subject: offset lifters
> > Date: Friday, October 12, 2001 8:51 AM
> >
> > List, I have bought a set of brownfield heads for a small block chevy
and
> had
> > a set of shaft mount rocker arms that I was going to use. When I
started
> to
> > install them they wouldn't fit, the valves are not in the stock
location.
> Now
> > my question is do I need offset lifters also and are they a standard
> offset
> > or do I need a special lifter for this application. I am going to use
> roller
> > lifters, I know this is basic stuff but I have never used offset
valves.
> > Thanks Larry Mac
///
/// land-speed@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe land-speed
///
/// or go to http://www.team.net/cgi-bin/majorcool
///
///
|