Tom -
I guess some people have had problems with some of the switches out there,
but I have four new switches on all four of my cars, and the lights on all
of them go one with the first touch of pressure, no problems.
Alan
'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8
On Wed, Apr 14, 2010 at 10:32 PM, John Harper <ah@jharper.demon.co.uk>wrote:
>
> Tom
>
> I am aware of many examples of aftermarket switches needing too much
> pressure before they activate. One example was when I drove down hill behind
> a 100 in Wales. His brake lights only came on when he braked hard whereas
> the A-H behind me said that mine came on whenever I put my foot on the
> pedal. His was a recently purchased item.
>
> I have never experienced any problems with an original pressure switch and
> my conclusion is that it is only the ones that are non original and recently
> supplied that are 'not to specification'.
>
> What do others think?
>
> Regards
>
>
> You can install a mechanical switch AND keep the original pressure se in
>> the system--that way you have a BU should the mechanical one fail. I added
>> the mechanical one because the original types always required a lot of
>> pressure to activate.
>>
>> With the mechanical one, a slight tap on the pedal and I have brake
>> kights.
>>
>> tom
>>
>
> --
> John Harper
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|