We have install a back up pump this way several times and we use a
turn signal switch for a Bugeye Sprite. It has a left and right
position with the center position turned off. Then you can stash the
switch up under the dash or install it in place of the dash light
switch and just a flick of the switch and the car will not run.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Aug 15, 2008, at 10:07 AM, MBran89793@aol.com wrote:
> Hi Gary-
>
> Since you carry a spare SU pump why not go a step further and
> install it in
> a parrallel fashion with an individual switch for each pump.
> In our BJ8 use 2 Neg ground SUs mounted side by side with double
> fitting
> banjos on the original pump and fuel lines to the single banjo
> fittings on the
> additional pump.
> A little anti theft secret is is to put a on/off toggle switch to each
> pump.In that fashion you have the option of which one you wish to
> use or both if
> the case should arrise where you experience a vaccum block and need
> the
> additional pressure to pump the fuel to the carbs.
>
> Contact me off list if you are interested I do have a listing of
> all the
> parts necessary to make this conversion and apicture of the
> installation. I will
> send the picture and list to those that are interested. .
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|