On Wed 25/01/23 9:09 PM , Charly charly@mitchelplumbing.com sent:
> Walt, I have been using Max Speed rods for about 10 years. I have never
> had a rod failure since I've started using them. When I first saw them and
> decided to try them, I asked the FoT what the
> thought was about them and the general consensus then why are you buying
> Chinese rods? My first set I took to my machine shop and they looked them
> over and found
> they were very well balanced, all equal in weight and the only difference
> was there were to slots to index the bearings.
> I have only used stock lightened and balanced rods and the MaxSpeed rods
> and have nothing else to compare them to. I probably don't make as much
> power or rev my motor as high as others, I have been using a billet crank I
> bought with the group from
> Farndon Industries, about 50 lbs. and only am revving to about 7k rpm, my
> CR is about 12:1 or less and I use a lightened alloy (not aluminum) flywheel,
> about 12 lbs. I have not had any
> rod bolt failures, maybe I'm lucky. I'm also using a Tilton 7 1/2
> clutch.The cam I've used the majority of the time is a D9 grind, mainly
> because
> it's friendlier with the fuel injection. I use the Goodparts header as
> it's a thing of beauty. The head is about 3.30 thick uses gas flowed valves
> and TR5 springs with titanium
> retaines. I alsp use a 1.65 : 1 roller rocker set, also from
> Goodparts.I don't know if I can call my motor full race, but I've used it with
> Webbers, PI and triple ZS carbs. Never been on a dyno, but guessing close
> to 190 hp.
>
>
>
>
> On Wed 25/01/23 10:28 AM , Walt Hollowell via Fot fot@autox.
> team.net sent:> I have built a few full race engines for my TR6
> using MaxSpeeding> connecting rods with acceptable results. For my
> next build I am> considering Carrillo rods which run about $650
> more than the> MaxSpeeding rods.
> >
> > Do and FOT members feel that the Carrillo rods
> are worth the extra> bucks or should I be happy with the MaxSpeeding
> considering the> affordability?
> >
> > Thanks,
> >
> > Walter Hollowell
> >
> > Albuquerque, New Mexico
> > [1]
> > Virus-free.www.avg.com [2]> [3]
> >
> > Links:
> > ------
> > [1]
> > http://www.avg.com/email-signature?utm_medium=email&utm_sou
> rce=link&utm_cam>
> paign=sig-email&utm_content=emailclient[2]>
> http://www.avg.com/email-signature?utm_medium=email&utm_sou
> rce=link&utm_cam>
> paign=sig-email&utm_content=emailclient[3]>
> http://webmail.centurylinkoffice.net/#DAB4FAD8-2DD7-40BB-A1B8-4
> E2AA1F9FDF2>
> >
>
>
>
>
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
|