Walt, I have been using Max Speed rods for about 10 years. I have never had a
rod failure since I've started using them.
When I first saw them and decided to try them, I asked the FoT what the thought
was about them and the general consensus then why are you buying Chinese rods?
My first set I took to my machine shop and they looked them over and found they
were very well balanced, all equal in weight and the only difference was there
were to slots to index
the bearings.
I have only used stock lightened and balanced rods and the MaxSpeed rods and
have nothing else to compare them to. I probably don't make as much power or
rev my motor as high as
others, I have been using a billet crank I bought with the group from Farndon
Industries, about 50 lbs. and only am revving to about 7k rpm, my CR is about
12:1 or less and I use a
lightened alloy (not aluminum) flywheel, about 12 lbs. I have not had any rod
bolt failures, maybe I'm lucky. I'm also using a Tilton 7 1/2 clutch.
The cam I've used the majority of the time is a D9 grind, mainly because it's
friendlier with the fuel injection. I use the Goodparts header as it's a thing
of beauty. The head is
about 3.30 thick uses gas flowed valves and TR5 springs with titanium retaines.
I alsp use a 1.65 : 1 roller rocker set, also from Goodparts.
I don't know if I can call my motor full race, but I've used it with Webbers,
PI and triple ZS carbs. Never been on a dyno, but guessing close to 190 hp.
On Wed 25/01/23 10:28 AM , Walt Hollowell via Fot fot@autox.team.net sent:
> I have built a few full race engines for my TR6 using MaxSpeeding
> connecting rods with acceptable results. For my next build I am
> considering Carrillo rods which run about $650 more than the
> MaxSpeeding rods.
>
> Do and FOT members feel that the Carrillo rods are worth the extra
> bucks or should I be happy with the MaxSpeeding considering the
> affordability?
>
> Thanks,
>
> Walter Hollowell
>
> Albuquerque, New Mexico
> [1]
> Virus-free.www.avg.com [2]
> [3]
>
> Links:
> ------
> [1]
> http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam
> paign=sig-email&utm_content=emailclient[2]
> http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam
> paign=sig-email&utm_content=emailclient[3]
> http://webmail.centurylinkoffice.net/#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2
>
>
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
|