Just ordered some parts from Brian at BFE, he indicated that he would
like to join this list. I asked him about e-mail address and this one:
bfeparts@aol.com
is the one he'd like to use.
I'll gladly second the nomination.
Mark, can you add Brian Howlett?
Regards, Tony Drews
At 06:37 PM 11/13/2016, Jim Gray wrote:
>Brian Howlett at BFE confirmed his Comp isky springs work at .549. On that
>note Brian is in business as BFE and fully operational. He's raced a TR4
>powered Morgan for 45+ years
>And really knows these motors.
>Is Brian a member ?? If not I'd like to nominate him.
>Jim G.
>
>-----Original Message-----
>From: Tony Drews [mailto:tony@tonydrews.com]
>Sent: Saturday, November 12, 2016 3:18 PM
>To: toodamnfunky@comcast.net; fot <fot@autox.team.net>
>Subject: Re: [Fot] TR4 valve springs for .549 lift ?
>
>That seems about what I'm running for lift. I'm running springs from BFE
>and they don't bind. They seem close to the TR-4 springs sold by Crower - I
>ended up with Crower titanium retainers when BFE went offline (it's back
>under new ownership). Isky also has a spring set for TR-4, not sure if
>those support that lift but I'm guessing they do.
>
>www.BritishFrameandEngine.com / BFEparts@aol.com
>
>Regards, Tony
>
>At 12:52 PM 11/10/2016, toodamnfunky@comcast.net wrote:
> >FoT,
> >I'm changing cam spec this year and the new cam will lift at the valve
> >to .549.
> >Can anyone suggest a source for valve springs that will work with .549 ?
> >_______________________________________________
> >fot@autox.team.net
> >
> >http://www.fot-racing.com
> >
> >Donate: http://www.team.net/donate.html
> >Archive: http://www.team.net/archive
> >Forums: http://www.team.net/forums
> >Unsubscribe/Manage:
> >http://autox.team.net/mailman/options/fot/tony@tonydrews.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|