Try a local spring shop. When I needed u-bolts some years ago the spring shop
bent them for me to match the axle tube diameter. Joe(B)
---------- Original Message ----------
From: "J.C. Hassall" <jhassall@blacksburg.net>
To: fot <fot@autox.team.net>
Subject: [Fot] source for TR4 rear axle U bolts?
Date: Wed, 20 Jan 2010 12:39:09 -0500
I'm looking for a source for 3/8" grade 8 U bolts (or bolt stock) for
the TR4 solid axle. I've checked the usual suspects locally but no one
carries bolt stock that small. Even utility trailer shops don't carry
stock smaller than 1/2". Sheesh!
tia
jim
--
Jim Hassall
Blacksburg VA
'63 TR4 in autox preparation
99% finished, 90% to go
Suggested annual donation $12.96
You are subscribed as jaboruch@netzero.net
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
____________________________________________________________
Weight Loss Program
Best Weight Loss Program - Click Here!
http://thirdpartyoffers.netzero.net/TGL2231/c?cp=Mp9AaUii1kCSxWy7HwyTsQAAJz6U
0HcZ7PRpF0fndYeeSkVqAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAAEUgAAAAA=
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.96
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|