Jim,
I'll be have some made at spring shop for my TR in the next couple of
days. It takes about ten minutes to make them. I'm making mine 2"
longer than stock so I can fine tune ride height with blocks. You want
me to have them make you a set? What length?
I am using the stock diameter of 3/8".
Anyone else need some? Different diameter?
Greg
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of J.C. Hassall
Sent: Wednesday, January 20, 2010 11:39 AM
To: fot
Subject: [Fot] source for TR4 rear axle U bolts?
I'm looking for a source for 3/8" grade 8 U bolts (or bolt stock) for
the TR4 solid axle. I've checked the usual suspects locally but no one
carries bolt stock that small. Even utility trailer shops don't carry
stock smaller than 1/2". Sheesh!
tia
jim
--
Jim Hassall
Blacksburg VA
'63 TR4 in autox preparation
99% finished, 90% to go
Suggested annual donation $12.96
You are subscribed as ablake2@austin.rr.com
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.96
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|